Indian Institute of Technology, Roorkee (IIT Roorkee) has released the official syllabus for GATE Electrical Engineering Exam 2025 on its website http://gate.iitr.ac.in. GATE 2025 exam conducted by IIT Roorkee will be held in February 2025. To perform well in the Electrical Engineering section of the GATE 2025 exam, candidates are required to be familiar with the syllabus. Understanding the syllabus will help you know the topics that will be covered in the exam. To help you prepare effectively we have provided here the complete GATE 2025 Electrical Engineering Syllabus. Make sure to review the complete syllabus given below and save this page for latest updates on GATE and other engineering exams.
gate electrical engineering syllabus 2025
GATE Electrical Engineering Syllabus 2025 is discussed here to help the candidates make their preparation effective. Graduate Aptitude Test in Engineering is a computer based online examination conducted to test the academic knowledge, technical skills and understanding of concepts of the candidates.
You should refer to the GATE 2025 syllabus for Electrical Engineering discipline given here to plan your preparation accordingly. For complete information on GATE Electrical Syllabus 2025, read the complete article carefully and bookmark this website for further engineering exams updates.
GATE Electrical Engineering Syllabus 2025-Overview
Candidates should check the table given below for a brief overview of GATE Electrical Engineering Syllabus 2025.
| gate electrical engineering syllabus 2025 | |
| gate full form | Graduate Aptitude Test for Engineering (GATE) |
| GATE 2025 Conducting Authority | IIT Roorkee |
| GATE 2025 number of papers | 30 |
| GATE 2025 Exam Pattern | Computer Based Test (CBT) |
| Number of questions asked | 65 |
| GATE 2025 marks distribution | 15 marks (General Aptitude) + 85 marks (Subject questions) = 100 marks (Total) |
| gate exam language | English |
| gate marking scheme | one mark and two marks |
| negative marking | Yes |
gate exam 2025
Graduate Aptitude Test in Engineering is one of the most prestigious and popular examinations in India for technical graduates. It offers various career opportunities to the candidates like admission into PG program in top institutes of the country and PSU jobs. GATE 2025 is a standardized examination conducted at the national level to check the understanding of students in their respective branches.
Check: Benefits of GATE Exam
gate electrical syllabus 2025
Candidates who are going to appear for GATE exam 2025 must be well versed with the GATE Electrical Engineering Syllabus 2025 to get a better understanding of the exam. Candidates are advised to start their preparation early as per the syllabus to score good marks in the examination. The officials have already released the GATE Syllabus for Electrical on their official website. Candidates can check the complete subject-wise syllabus given below.
gate electrical exam pattern 2025
GATE 2025 Electrical Engineering question paper will consist of 65 questions from 3 sections i.e. General Aptitude, Engineering Mathematics and Specific Subject. All questions will be of three types, namely MCQ, MSQ and NAT. GATE 2024 Electrical exam pattern is given in this section:
| gate electrical engineering exam pattern 2025 | |
| GATE 2025 exam mode | Computer Based Test (Online) |
| gate 2025 exam duration | 3 hours |
| GATE Exam 2025 Number of Subjects | 30 subjects |
| GATE Exam 2025 Total Marks | 100 points |
| GATE Exam 2025 Number of Questions | 10 (GA) + 55 (Subject) = 65 questions |
| GATE 2025 question types | Multiple Choice Questions, Multiple Choice Questions and Numerical Answer Type Questions |
gate electrical engineering syllabus pdf
Candidates can download GATE Electrical Engineering Syllabus PDF through direct link given below. Candidates must know the Electrical Engineering syllabus to be successful in the upcoming GATE exam preparation. GATE Electrical Syllabus 2025 is a reference to plan your preparation as per the requirement of the exam. Follow the direct link available here to access GATE Electrical Engineering Syllabus in PDF format.
GATE Electrical Engineering Syllabus 2024- Click Here
GATE Electrical Syllabus 2025 in detail
The main points related to GATE Electrical Engineering Syllabus 2025 are given below for proper understanding of the candidates:
Section 1: Engineering Mathematics
The main points related to Engineering Mathematics syllabus are given below:
linear algebra:
- matrix algebra,
- system of linear equations,
- indigenous value,
- Eigenvectors.
Calculus:
- mean value theorem,
- theorems of integral calculus,
- Evaluation of Definite and Improper Integrals,
- partial derivative,
- maxima and minima,
- multiple integral,
- Fourier series,
- vector identity,
- directional derivative,
- line integral,
- surface integral,
- volume integral,
- Stokes’ theorem,
- Gauss’s theorem,
- divergence theorem,
- Green’s theorem.
differential equations:
- First-order equations (linear and nonlinear),
- Higher-order linear differential equations with constant coefficients,
- Method of variation of parameters,
- Cauchy’s equation,
- Euler’s equation,
- Initial and boundary value problems,
- partial differential equation,
- Method of separation of variables.
Complex variables:
- analytical work,
- Cauchy’s integral theorem,
- Cauchy’s integral formula,
- taylor series,
- laurent series,
- Remainder Theorem,
- Solution integral.
Probability and Statistics:
- sampling theorem,
- conditional probability,
- mean, median, mode, standard deviation,
- random variables,
- discrete and continuous distribution,
- Poisson distribution,
- normal distribution,
- binomial distribution,
- correlation analysis,
- regression analysis.
Section 2: Electrical Circuits
The Electric Circuits section of GATE EE syllabus includes the following topics:
- Network Elements:
- Ideal voltage and current source,
- Dependent Source, R, L, C, M elements;
- Network solution methods: KCL, KVL, node and mesh analysis;
- Network Theorem: Thevenin, Norton, Superposition and Maximum Power Transfer
theorem; - Transient response of DC and AC networks,
- sinusoidal steady-state analysis,
- echo,
- two-port network,
- balanced three phase circuit,
- star-delta transformation,
- Complex power and power factors in AC circuits.
Section 3: Electromagnetic Field
The Electromagnetic Field section of GATE EE Syllabus 2025 includes the following topics:
- Coulomb’s law,
- electric field intensity,
- electric flux density,
- Gauss’s law,
- deviation,
- Electric field and potential due to a point,
- lines
- plane and spherical charge distribution,
- effect of dielectric medium,
- simple configuration capacitance,
- Biot-Savart’s law,
- ampere’s law,
- curl,
- Faraday’s law,
- lorentz force,
- installation,
- magnetomotive force,
- reluctance,
- magnetic circuit,
- Self and mutual induction of simple configurations.
Section 4: Signals and Systems
The Signals and Systems section of GATE Electrical Syllabus 2025 includes the following topics:
- Representation of continuous and discrete time signals,
- Transfer and scaling properties,
- linear time invariant and causal systems,
- Representation of Fourier series constant
- and discrete time periodic signals,
- sampling theorem,
- Applications of Fourier transform to continuous and discrete time signals,
- Laplace transform and Z transform.
- rms value,
- Average value calculation for any general periodic wave
Section 5: Electrical Machines
The Electrical Machines section of GATE EE syllabus includes the following topics:
- Single Phase Transformer: equivalent circuit,
- phase diagram,
- Open circuit and short circuit testing,
- regulation and efficiency;
- Three Phase Transformer: connection, vector group,
- parallel operations; auto transformer,
- Electromechanical energy conversion principles;
- DC Machines: separately excited,
- series and shunt,
- Motoring and generating modes of operation and their characteristics,
- Speed ​​control of DC motors;
- Three-phase induction machines: principle of operation,
- Types, performance, torque-speed characteristics,
- No-load and blocked-rotor testing,
- equivalent circuit,
- Start and speed control;
- Operating principle of single-phase induction motors;
- Synchronous Machines: cylindrical and main pole machines,
- Performance and Features,
- Regulation and parallel operation of generators,
- Starting of synchronous motors;
- Calculation of types of losses and efficiency of electrical machines.
Section 6: Electrical Systems
The Power Systems section of GATE EE Syllabus 2025 includes the following topics:
- Basic concepts of electrical energy production,
- AC and DC Transmission Concepts,
- Models and performance of transmission lines and cables,
- Economic load transmission (with and without considering transmission losses),
- series and shunt compensation,
- Electric field distribution and insulators,
- distribution system,
- Quantity Per Unit,
- bus admittance matrix,
- Gauss-Seidel and Newton-Raphson load flow methods,
- voltage and frequency control,
- power factor correction,
- symmetrical components,
- Symmetric and Asymmetric Fault Analysis,
- principles of over-current,
- Difference,
- directional and distance protection;
- circuit breakers,
- system stability concepts,
- Criterion of equal area.
Section 7: Control System
The Control Systems section of GATE EE syllabus covers the following topics:
- Mathematical modeling and representation of systems,
- reaction theory,
- transfer function,
- block diagrams and signal flow graphs,
- Transient and steady-state analysis of linear time invariant systems,
- Stability analysis using the Routh-Hurwitz and Nyquist criteria,
- bode plots,
- root loki,
- Lag, lead and lead-lag compensators;
- P, PI and PID controllers;
- state space model,
- Solution of state equations of LTI systems
Section 8: Electrical and Electronic Measurements
The Electrical and Electronic Measurement section of GATE Electrical Engineering Syllabus 2025 includes the following topics:
- Bridge and Potentiometer,
- measurement of voltage,
- current, power,
- Energy and power factors;
- instrument transformer,
- digital voltmeter and multimeter,
- phase, time and frequency measurements;
- oscilloscope,
- error analysis.
Section 9: Analog and Digital Electronics
The Analog and Digital Electronics section of GATE Electrical Syllabus 2025 includes the following topics:
- Simple Diode Circuit: Clipping, Clamping, Rectifier;
- Amplifier: Biasing, equivalent circuits and frequency response;
- Oscillator and Feedback Amplifier;
- Operational Amplifier: Features and Applications;
- single stage active filter,
- Active Filter: Saleen’s,
- butterwoth,
- VCO and timer,
- Combinational and Sequential Logic Circuits,
- multiplexers,
- demultiplexers,
- Schmitt trigger,
- sample and hold the circuit,
- A/D and D/A converters.
Section 10: Power Electronics
The Power Electronics section of GATE Electrical syllabus includes the following topics:
- Static VI characteristics and firing/gating circuits for thyristors,
- MOSFET, IGBT;
- DC to DC Conversion: Buck, boost and buck-boost converters;
- Single and three-phase configurations of uncontrolled rectifiers;
- Voltage and current commutated thyristor based converters;
- Bidirectional AC to DC voltage source converters;
- magnitude and
- Phase of line current harmonics for uncontrolled and thyristor-based converters;
- Power factor and distortion factor of AC to DC converters;
- Single-phase and three-phase voltage and current source inverters,
- Sinusoidal pulse width modulation.
sharing is Caring!
